Services
Warranties
Roof Glossary
Why Use a System
Danger Signals
Shingle Selector

Click on any of these Key Danger Signals to learn more.

Attic Leakage-Wet, Rainy Climates
Blistering/Peeling Paint
Interior Stains
Exterior Decay
Cracking and Curling
Dirty-Looking Areas
Energy Costs


Leakage in attic after wind-driven rain
Possible cause: Leaky or inadequate shingle underlayment or deteriorated flashing

(Back to Top)


Blistering and/or peeling of interior and/or exterior paint
Possible cause: Excessive temperature or high humidity due to poor attic ventilation

(Back to Top)

Stains on interior ceilings and walls or mold and mildew growth
Possible cause: Inadequate or faulty shingle underlayment allowing leakage or inadequate ventilation

(Back to Top)

Decay of roof shingles, sheathing, and/or siding
Possible cause: Poor attic ventilation

(Back to Top)

Missing, cracked or curled shingles
Possible cause: Shingles have reached the end of their useful life

(Back to Top)

Dark, "dirty-looking" areas on your roof
Possible cause: Environmental pollutants; vegetation, fungus or algae; loss of granules due to age of shingles

(Back to Top)

Excessive energy costs
Possible cause: Insufficient attic ventilation causes heating/cooling system to run excessively

In warm weather, inadequate ventilation will trap hot air in the attic, causing air c onditioning systems to work harder, or leaving your home's interior hotter and less comfortable. Attic Ventilation: In both hot and cold weather, insufficient attic ventilation may cause moisture in the attic to become trapped and condense on the rafters. This condensed moisture can drip down onto the insulation and reduce its effectiveness.
Excessive energy costs can result.

(Back to Top)

 



 
 

Affiliations and Certifications:

 
 
   
www.floridaroof.com

Phone Number:
386-677-9265
Fax Number:
386-615-3850
Home | Contact | Questions | Estimates | Siding | Flat Roof | Home Roof | Why Us
Web Hosting by PlanetUSofA  
Web Design by Tinker Graphics